Simulation and implementation of IEEE 802.11p standard communications
Tutor / Supervisor
Student
Mas Ferrer, Marc
Document type
Bachelor thesis
Date
2018
rights
Open Access
Publisher
Universitat Politècnica de Catalunya
UPCommons
Abstract
The main objective of this project is to test, in a MATLAB simulation environment the physical layer of the Wi-Fi standard named IEEE 802.11p, and then in a laboratory environment, test its possibilities by sending and receiving packets using a Red Pitaya. To do so, the first thing that had to be done was the research on the standard (when and why is it used, its physical and MAC layers characteristics and the differences between it and the other existing Wi-Fi standards). Secondly, a MATLAB application which simulates the transmission of packets with the IEEE 802.11p format had to be done. Finally, using the MATLAB code and a Red Pitaya, the IEEE 802.11p packets were sent electrically and received by the same Red Pitaya.
El objetivo principal de este proyecto es probar, en un entorno de simulación MATLAB, la capa física del estándar Wi-Fi denominado IEEE 802.11p, y después, en un entorno de laboratorio, probar sus posibilidades enviando y recibiendo paquetes utilizando Red Pitaya. Para hacerlo, lo primero que se tuvo que hacer fue la investigación sobre el estándar (cuándo y por qué se usa, las características de sus capas física y MAC y las diferencias entre éste y los otros estándares de Wi-Fi existentes). En segundo lugar, se desarrolló una aplicación MATLAB que simula la transmisión de paquetes con el formato IEEE 802.11p. Finalmente, usando el código MATLAB y una Red Pitaya, los paquetes IEEE 802.11p fueron enviados eléctricamente y recibidos por el mismo Red Pitaya.
L'objectiu principal d'aquest projecte és provar, en un entorn de simulació MATLAB, la capa física de l'estàndard Wi-Fi denominat IEEE 802.11p, i després, en un entorn de laboratori, provar les seves possibilitats enviant i rebent paquets utilitzant Red Pitaya. Per fer-ho, el primer que es va haver de fer, va ser la investigació sobre l'estàndard (quan i per què es fa servir, les característiques de les seves capes física i MAC i les diferències entre aquest i els altres estàndards de Wi-Fi existents). En segon lloc, es va desenvolupar una aplicació MATLAB que simula la transmissió de paquets amb el format IEEE 802.11p. Finalment, usant el codi MATLAB i una Red Pitaya, els paquets IEEE 802.11p van ser enviats elèctricament i rebuts pel mateix Red Pitaya.
