Análisis y verificación del sistema de protección contra incendios y evacuación de usuarios, por medio de la aplicación de software informáticos de simulación
Tutor / Supervisor
Student
Flores Buñay, Jorge Jhonatan
Document type
Master thesis
Date
2021
rights
Open Access
Publisher
Universitat Politècnica de Catalunya
UPCommons
Abstract
El presente trabajo pretende analizar el sistema de protección contra incendios y evacuación de usuarios del edificio SENSE, ubicado en la ciudad de Quito, Ecuador. Se elabora un modelo 3D por medio de la utilización del software Revit, herramienta que implementa la metodología BIM, este nos permite definir la geometría del edificio, considerar materiales y sus especificaciones técnicas. Para lograr un análisis optimo se consideraron tres factores importantes: a) la carga del fuego; donde se tomó en cuentatiempo de propagación del fuego, carga de calor y temperatura, b) características del edificio; densidades, calor especifico, conductividad, emisividad, coeficiente de absorción, y c) características de los ocupantes, determinadas por medio de una encuesta.Por medio del uso de programas computacionales de simulación Pyrosim y Pathfinder, se parametrizó y elaboró el comportamiento del fuego y las rutas de evacuación del objeto de estudio.El análisis de los resultados de simulación de incendio se basa principalmente en el cálculo que nos permite introducir parámetros dependiendo del área de estudio, entre estos los más importantes son; latasa de liberación de calor y utilización del diámetro de la malla. Así para el análisis de simulación de evacuaciónse toma en cuenta principalmente el comportamiento de las personas, las velocidades y sus características.
The present work aimsto analyze the evacuation and fire protection system of the users of the SENSE building, located in the city of Quito, Ecuador.A 3D model is developed through the use of Revit software, a tool that implements the BIM methodology, which allows defining the geometry of the building, considering the materials and their technical specifications. To achieve an optimal analysis, three important factors are considered: a) fire load; where the fire propagation time, thermal load and temperature were taken into account, b) characteristics of the building; densities, specific heat, conductivity, emissivity, absorption coefficientand c) characteristics of the occupants, determined by survey.By using the Pyrosim and Pathfinder computer simulation programs, the behavior of the fire and the evacuation routes of the object of study were parameterized and elaborated.The analysis of the results of the fire simulation is based mainly on the calculation that allows the introduction of parameters depending on the study area, among these are the most important; the rate of heat release and the utilization of the mesh diameter. Thus, for the evacuation simulation analysis, the behavior of people, their speeds and their characteristics are mainly taken into account.
Location
