Aprèn - José Polo Cantero

Nowadays, we are surrounded by electronic devices that make our routine easier and help us in our daily tasks. These devices, every day, are more complex and contribute more information and better management of things. That is why the Internet of Things (IoT) was created, which is based on being able to connect millions of devices to the Internet. The use of new protocols and standards is essential for all these devices to have Internet connectivity and the ability to communicate with each other. In this way, they enable us to interact with other users. In this work, some of the functionalities of the Firefly platform sensors, whose brand is Zolertia [1], were tested. The implementation of these nodes was done over the IEEE.802.15.4 and 6LoWPAN standard. The latter is a version of the IPv6 protocol adapted for equipment or systems with low resources and reduced bandwidth. The sensors are composed of a microcontroller board, which is connected to a rechargeable power supply. On the other hand, to program these devices we will use a development environment or operating system called Contiki OS, suitable for IoT devices. The interconnection of these sensors will establish a WSN (Wireless Sensor Network) and they will use the RPL protocol (Routing Protocol for Lower - Power and Lossy networks) to communicate with each other. They will also communicate with the Internet through a BR (Border Router). There are three types of motes: a mote connected to the Border Router, which will take on the role of master and will be in charge of receiving all the data or information from the network. The router motes will redirect all the packets and also send data to the master. And the end motes will only transmit information to the contiguous motes. For the development of the border router or BR, which divides the PAN (Personal Area Network) network from the Internet network, we have chosen to use a Raspberry Pi. Thus, all the necessary packages for the implementation of the Cetic 6LBR solution have been configured and installed on it. On the other hand, a Python process has been set up so that all the information collected is stored on the Ubidots server. This makes it easier to store all the data so that it can be viewed from anywhere.

ELECTRÒNICA EN LES TELECOMUNICACIONS (Examen parcial, 1r quadrimestre) Restricted access to the UPC academic community

Examen

Gasulla Forner, Manuel; Polo Cantero, José; Reverter Cubarsí, Ferran

Fecha de publicación: 2020

Escuela de Ingeniería de Telecomunicación y Aeroespacial de Castelldefels (EETAC)

ELECTRÓNICA EN LAS TELECOMUNICACIONES - 300013

Acceso al texto completo

ELECTRÒNICA EN LES TELECOMUNICACIONS (Examen final, 1r quadrimestre) Restricted access to the UPC academic community

Examen

Gasulla Forner, Manuel; Jordana Barnils, José; Polo Cantero, José; Reverter Cubarsí, Ferran

Fecha de publicación: 2020

Escuela de Ingeniería de Telecomunicación y Aeroespacial de Castelldefels (EETAC)

ELECTRÓNICA EN LAS TELECOMUNICACIONES - 300013

Acceso al texto completo

Design of a Wireless Sensor Network (WSN) using Bluetooth Low Energy (BLE) for environmental and biological measurements for Internet of Things (IoT)

Trabajo final de grado

Garreta Serra, Sergi

Tutor/a - Director/a: Polo Cantero, José

Fecha de publicación: 2020

Escuela de Ingeniería de Telecomunicación y Aeroespacial de Castelldefels (EETAC)

Ver detalle Acceso al texto completo

Development of a Wireless Sensor Network (WSN) using LoRaWAN and Sigfox for environmental and agricultural measurements for Internet of Things (IoT)

Projecte Final de Màster Oficial

García Palau, Enric

Tutor/a - Director/a: Polo Cantero, José

Fecha de publicación: 2020

Escuela de Ingeniería de Telecomunicación y Aeroespacial de Castelldefels (EETAC)

Acceso al texto completo

Development of a wireless sensor network for agricultural monitoring for Internet of Things (IoT)

Projecte Final de Màster Oficial

Rajora, Gopal Lal

Tutor/a - Director/a: Polo Cantero, José

Fecha de publicación: 2020

Escuela de Ingeniería de Telecomunicación y Aeroespacial de Castelldefels (EETAC)

Ver detalle Acceso al texto completo

ELECTRÒNICA EN LES TELECOMUNICACIONS (Examen parcial, 1r quadrimestre) Restricted access to the UPC academic community

Examen

Gasulla Forner, Manuel; Jordana Barnils, José; Polo Cantero, José; Reverter Cubarsí, Ferran

Fecha de publicación: 2019

Escuela de Ingeniería de Telecomunicación y Aeroespacial de Castelldefels (EETAC)

ELECTRÓNICA EN LAS TELECOMUNICACIONES - 300013

Acceso al texto completo

Design of a wireless sensor network (WSN) using bluetooth low energy (BLE) for Internet of Things (IoT)

Trabajo final de grado

Sánchez Vique, Andrea

Tutor/a - Director/a: Polo Cantero, José

Fecha de publicación: 2019

Escuela de Ingeniería de Telecomunicación y Aeroespacial de Castelldefels (EETAC)

Ver detalle Acceso al texto completo

Implementation of a wireless sensor network for agricultural monitoring for Internet of Things (IoT)

Projecte Final de Màster Oficial

Granda Rodriguez, Juan Ernesto

Tutor/a - Director/a: Polo Cantero, José

Fecha de publicación: 2019

Escuela de Ingeniería de Telecomunicación y Aeroespacial de Castelldefels (EETAC)

Ver detalle Acceso al texto completo

The agricultural sector is the first industry and the most impacted by the climate changes. The delicate environment that must manage some type of crops require d the constant monitoring and maintenance of the greenhouse. The Internet of Things (IoT) gives a new alternative for real time environmental monitoring of variables such as temperature, humidity and solar irradiation that can contribute for the health y growth of the crop , and also impact for the plagu es and sickness presence . The objective of this thesis is built a Wireless S ensor N etwork using radiofrequency devices and environmental sensor s . The limitation s of this master thesis are: the location of the sensor node , the external conditions that wi ll not impact the network, the simulation, test and pilots that are deployed in a controlled space . The wireless sensor network proposed employ s the Zolertia Motes using IEEE802.15.4 standard . This device allows low power consumption , as the nodes must be located in places where it may handle several week s without change depending on the autonomy of the ir batteries cell . The network protocol manage d works over l ow consumption , as same as the transmitted and received packets of data . T he standard used on this project is the 6LowPAN . T he network co nfigured works over the stack protocol IPv6 so that all the devices handled UDP and manage this internet package. The Raspberry Pi 3 B will work as border router between the sensor nodes and the exterior consider ed as Internet using the IPv4 standard internet router protocol. The framework used for the network implementation is ContikiOS installed on th e gateway and tested using one mote located in the la b . The data manage d in this experiment has low data rate as this measurement do not require a permanent monitoring and high speed . T he atmospherically changes are not variant enough to be observe d constantly . The sample rate will be 1 package each 10 minutes. This project aim s to develop a full network implementa tion since the mote until the dashboard .

Examen final. Test Restricted access to the UPC academic community

Examen

Polo Cantero, José

Fecha de publicación: 2019

Escuela de Ingeniería de Telecomunicación y Aeroespacial de Castelldefels (EETAC)
Escuela Técnica Superior de Ingeniería de Telecomunicación de Barcelona (ETSETB)

SISTEMAS DE BAJA POTENCIA CON CAPTACIÓN DE ENERGÍA - 300266

Acceso al texto completo

Examen final Restricted access to the UPC academic community

Examen

Polo Cantero, José

Fecha de publicación: 2019

Escuela de Ingeniería de Telecomunicación y Aeroespacial de Castelldefels (EETAC)
Escuela Técnica Superior de Ingeniería de Telecomunicación de Barcelona (ETSETB)

SISTEMAS DE BAJA POTENCIA CON CAPTACIÓN DE ENERGÍA - 300266

Acceso al texto completo